Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.

American Standard 4TCC3030A1000A - Silver Series, 2 1/2 Ton, 13 SEER, R410A Convertible Package Cooling, 208-230V, 1 Phase

Item: 4TCC3030C1000A
MFR: 4TCC3030A1000A
This product is no longer available for purchase.
Comparable Product:


Single Packaged Convertible Cooling 13 SEER, 1-1/2 to 5 Ton, R-410A Models. The units shall be horizontal airflow as shipped and convertible to Downflow. All units shall be factory assembled, piped, internally wired and fully charged with refrigerant. Units shall be certified to UL standard 1995. All units shall be factory run tested to check cooling operation, fan and blower rotation and control sequence. Units shall be designed to operate at ambient temperatures between 115°F and 55°F in cooling as manufactured. Cooling performance shall be rated in accordance with AHRI standards.

Unit Casing
All panels shall be heavy gauge steel, gasketed and insulated. Foil-faced fiber insulation shall be in the heater section. Foil-faced fiber insulation shall be in the evaporator section. Base pan shall be heavy gauge steel. WEATHERGUARD™ exterior corrosion resistant screws shall be used for added resistance to rust and corrosion.

The compressor shall be a hermetically sealed, high efficiency Duration™ compressor. Internal overcurrent and over temperature protection, internal pressure relief shall be standard. Other features include: centrifugal oil pump and low vibration and noise.

Refrigeration System
All units shall have refrigerant control. Service pressure tap ports, and a refrigerant line filter shall be standard.

Evaporator Coil
Internally enhanced 3/8 inch OD seamless copper tubing mechanically bonded to aluminum fins, factory pressure and leak tested at 250 to 300 psig. All units have TXV to control refrigerant flow.

Condenser Coil
The Spine Fin™ condenser coil shall be continuously wrapped, corrosion resistant all aluminum with minimum brazed joints. This coil is 3/8 inch O.D. seamless aluminum tubing glued to a continuous aluminum fin. Coils are lab tested to withstand 2,000 pounds of pressure per square inch. The outdoor coil provides low airflow resistance and efficient heat transfer. The coil is protected on all four sides by louvered panels.


NameAmerican Standard 4TCC3030A1000A - Silver Series, 2 1/2 Ton, 13 SEER, R410A Convertible Package Cooling, 208-230V, 1 Phase
BrandAmerican Standard
Gemaire Item Number4TCC3030C1000A
Manufacturer Product Number4TCC3030A1000A
SKU - PIM Number1386941893780
ERP Number152998
Unit of MeasureEACH
Weight349.0 Pound (lb.)
Length48.8 Inches (in)
Width41.3 Inches (in)
Height35.4 Inches (in)
Hazardous MaterialNo
EPA Cert RequiredNo
Country of OriginUSA
Equipment TypeAir Conditioner
Cooling Capacity30000
Air FlowDownflow / Horizontal
Voltage208-230 VAC
Minimum Circuit Amps15.9
Maximum Fuse Size25
Blower Motor HP1/2 HP
Condenser Motor HP1/6 HP
Rated Load Amps9
Locked Rotor Amps73
CertificationsAHRI, Nate
Number of Fan Blades1
Warranty Offered10 Year Limited Compressor - 10 Year Limited Functional Parts - 10 Year Limited Outdoor Coil with Registration
Energy Star RatedYes
LEED CertifiedNo
Product Family4TCC4
Tonnage2 1/2
GEM - Case Quantity