Gold Series, 14 SEER, R410A Convertible Cooling Package Unit - The units shall be horizontal airflow as shipped and convertible to Downflow. All units shall be factory assembled, piped, internally wired and fully charged with R410A. All units shall be factory run tested to check cooling operation, fan and blower rotation and control sequence. Units shall be designed to operate at ambient temperatures between 55°F and 115°F in cooling as manufactured. Cooling performance shall be rated in accordance with A.R.H.I. standards.
All panels shall be heavy gauge steel, gasketed and insulated. Foil-faced fiber insulation shall be in the heater section. Foil-faced fiber insulation shall be in the evaporator section. Base pan shall be heavy gauge steel. WEATHERGUARD™ exterior corrosion resistant screws shall be used for added resistance to rust and corrosion.
The compressor shall be a hermetically sealed, high efficiency Duration™ compressor. Internal overcurrent and over temperature protection, internal pressure relief shall be standard. Other features include, centrifugal oil pump and low vibration and noise.
All units shall have refrigerant control. Service pressure tap ports, and a refrigerant line filter shall be standard.
Internally enhanced 3/8 inch OD seamless copper tubing mechanically bonded to aluminum fins, factory pressure and leak tested at 250 to 300 psig. All units have a TXV to control refrigerant flow.
The Spine Fin™ condenser coil shall be continuously wrapped, corrosion resistant all aluminum with minimum brazed joints. This coil is 3/8 inch O.D. seamless aluminum tubing glued to a continuous aluminum fin. Coils are lab tested to withstand 2,000 pounds of pressure per square inch. The outdoor coil provides low airflow resistance and efficient heat transfer. The coil is protected on all four sides by louvered panels.
|Name||American Standard 4TCY4042B1000B - Gold Series, 3 1/2 Ton, 14 SEER, R410A Convertible Packaged Cooling, 208-230V, 1 Phase|
|Gemaire Item Number||4TCY4042B1000B|
|Manufacturer Product Number||4TCY4042B1000B|
|SKU - PIM Number||1386941901452|
|Unit of Measure||EACH|
|Weight||479.0 Pound (lb.)|
|Length||60.3 Inches (in)|
|Width||46.1 Inches (in)|
|Height||37.4 Inches (in)|
|EPA Cert Required||No|
|Country of Origin||USA|
|Equipment Type||Straight Cool|
|Air Flow||Downflow / Horizontal|
|Minimum Circuit Amps||30.7|
|Maximum Fuse Size||45|
|Blower Motor HP||1/2 HP|
|Condenser Motor HP||1/5 HP|
|Rated Load Amps||17.9|
|Locked Rotor Amps||112|
|Number of Fan Blades||1|
|Sound Level (dBA)||74|
|Warranty Offered||10 Year Limited Compressor - 10 Year Limited Functional Parts - 10 Year Limited Outdoor Coil with Registration|
|Energy Star Rated||Yes|
|GEM - Case Quantity|