Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.

American Standard 4TCY4060A1000B - Gold Series, 5 Ton, 14 SEER, R410A Convertible Packaged Cooling, 208-230V, 1 Phase

Item: 4TCY4060A1000B
MFR: 4TCY4060A1000B
Checking price...
Decrease quantity
Increase quantity

Your Order Templates
Save products for later, or create lists to quickly re-buy items for routine jobs.

Add to Order Template

Inventory At Nearby Branches



Gold Series, 14 SEER, R410A Convertible Cooling Package Unit - The units shall be horizontal airflow as shipped and convertible to Downflow. All units shall be factory assembled, piped, internally wired and fully charged with R410A. All units shall be factory run tested to check cooling operation, fan and blower rotation and control sequence. Units shall be designed to operate at ambient temperatures between 55°F and 115°F in cooling as manufactured. Cooling performance shall be rated in accordance with A.R.H.I. standards.

Unit Casing
All panels shall be heavy gauge steel, gasketed and insulated. Foil-faced fiber insulation shall be in the heater section. Foil-faced fiber insulation shall be in the evaporator section. Base pan shall be heavy gauge steel. WEATHERGUARD™ exterior corrosion resistant screws shall be used for added resistance to rust and corrosion.

The compressor shall be a hermetically sealed, high efficiency Duration™ compressor. Internal overcurrent and over temperature protection, internal pressure relief shall be standard. Other features include, centrifugal oil pump and low vibration and noise.

Refrigeration System
All units shall have refrigerant control. Service pressure tap ports, and a refrigerant line filter shall be standard.

Evaporator Coil
Internally enhanced 3/8 inch OD seamless copper tubing mechanically bonded to aluminum fins, factory pressure and leak tested at 250 to 300 psig. All units have a TXV to control refrigerant flow.

Condenser Coil
The Spine Fin™ condenser coil shall be continuously wrapped, corrosion resistant all aluminum with minimum brazed joints. This coil is 3/8 inch O.D. seamless aluminum tubing glued to a continuous aluminum fin. Coils are lab tested to withstand 2,000 pounds of pressure per square inch. The outdoor coil provides low airflow resistance and efficient heat transfer. The coil is protected on all four sides by louvered panels.


NameAmerican Standard 4TCY4060A1000B - Gold Series, 5 Ton, 14 SEER, R410A Convertible Packaged Cooling, 208-230V, 1 Phase
BrandAmerican Standard
Gemaire Item Number4TCY4060A1000B
Manufacturer Product Number4TCY4060A1000B
SKU - PIM Number1386941901488
ERP Number199889
Unit of MeasureEACH
Weight484.0 Pound (lb.)
Length60.3 Inches (in)
Width46.1 Inches (in)
Height41.4 Inches (in)
Hazardous MaterialNo
EPA Cert RequiredNo
Country of OriginUSA
TierGold 14
Equipment TypeAir Conditioner
Cooling Capacity60000
Air FlowDownflow / Horizontal
Voltage208-230 VAC
Minimum Circuit Amps41.9
Maximum Fuse Size60
Blower Motor HP1 HP
Condenser Motor HP1/3 HP
Rated Load Amps26.4
Locked Rotor Amps134
CertificationsAHRI, Nate
Number of Fan Blades1
Sound Level (dBA)76
Warranty Offered5 Year Parts - 10 Year Parts with Registration within 60 Days
Energy Star RatedYes
LEED CertifiedNo
Product Family4TCY4
GEM - Case Quantity