Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.

Johnson Controls T600MSN-4 - #, Non-Programmable Thermostat 2 Heat/2 Cool

Item: T600MSN-4
MFR: T600MSN-4
This product is no longer available for purchase.
Comparable Product:

Description

The T600xxx-4 and T600xxx-4+PIR Series Thermostat Controllers are specifically designed for control of the most common commercial heating and cooling equipment. A number of configurable parameters enable the thermostat controller to effectively and efficiently control various types of equipment in nearly any application. Configuration, setup, and operation of the thermostat controller is extremely intuitive and is accomplished through user interface.

The T600xxP-4 and T600xxP-4+PIR Series Programmable Thermostat Controllers feature a fully programmable 7-day, 2- or 4-event schedule, along with two programmable digital inputs and one configurable output, enabling effective and efficient control of equipment in nearly any application.

The T600xxx-4 and T600xxx-4+PIR Series Thermostat Controllers offer many other features, including:
  • Stationary or Scrolling Display - Provides the option of having the display continuously scroll the parameters.
  • Three Levels of Keypad Lockout - Provide three levels of keypad lockout that can be set up through the Installer Configuration Menu.
  • Adjustable Power Delay on Startup - Enables a delay before any operation is authorized upon power up of the thermostat controller. Can be used for equipment protection or to sequence startup of multiple units in one location.
  • Frost Protection Enable/Disable - Turns the heat on when the zone temperature drops below 42°F (6°C) regardless of the mode the thermostat controller.
  • Adjustable Maximum Heating/Minimum Cooling Set points - Establish the maximum heating setpoint and minimum cooling setpoint that can be entered through the user interface.
  • Adjustable Anti-Short Cycling Timer - Adjusts the minimum on and off times for the equipment from 0 to 5 minutes.
  • Adjustable Heating/Cooling Cycles per Hour - Configurable for the maximum number of heating and cooling cycles (3 to 8 heating cycles maximum and 3 or 4 cooling cycles maximum) in a 1-hour period, balancing temperature control and equipment cycling.
  • Adjustable Heating/Cooling Dead band - Adjusts the minimum heating/cooling dead band from 2.0F°/1.0C° to 4.0F°/2.0C°.
  • Fan Control - Provides the option for equipment fan control.
  • Fan Delay Control - Enables the user to select how the fan operates on a call for heating and the delay at the end of the heating or cooling cycle.
  • Adjustable Temporary Occupancy Time - Adjusts the temporary occupancy time from 0 to 12 hours.
  • Sensor Offset Adjustments - Sets the desired room or outside air temperature calibration (offset).
  • System Mode Lockout - Allows the heating and cooling modes to be locked out based on the outside air temperature when an outside air temperature sensor is connected.
  • Unoccupied Timer (T600xxx-4+PIR Series) - Sets the time delay between the occupied and unoccupied modes after motion is detected.
  • Progressive Recovery - Ensures the correct temperature is reached at the programmed occupied time.
  • Smart Fan - Enables the fan to operate continuously during the occupied times and cycle with the equipment during the unoccupied times.
  • Remote Inside and Outside Air Temperature Sensing - Accommodates remote inside and outside air temperature sensors. Up to three inside air temperature sensors can be averaged.
  • Nonvolatile Electrically Erasable Programmable Read-Only Memory (EEPROM) - Prevents loss of adjusted parameters during power failure.
  • Heating and Cooling Stage Enable/Disable (T600MEP-4, T600MEP-4+PIR, and T600MSx-4 and T600MSx-4+PIR Series) - Allows operation of the second-stage heating and cooling to be disabled, reverting the thermostat controller to single-stage operation on multi-stage thermostat controllers.
  • Power Loss Backup for Clock (T600xxP-4 and T600xxP-4+PIR Series) - Retains clock setting for up to 6 hours in the event of a power loss.
  • High and Low Balance Point Adjustments - Enable more precise control of heat pump operation based on the outside air temperature (T600HPx-4 and T600HPx-4+PIR Series).
  • Heat Pump Compressor Stage Enable/Disable (T600HPx-4 and T600HPx-4+PIR Series) - Allows operation of the second-stage compressor to be disabled, reverting the thermostat controller to single-stage compressor operation on heat pump thermostat controllers.

Specifications

NameJohnson Controls T600MSN-4 - #, Non-Programmable Thermostat 2 Heat/2 Cool
BrandJohnson Controls
Gemaire Item NumberT600MSN-4
Manufacturer Product NumberT600MSN-4
SKU - PIM Number1405423018031
ERP Number323974
UPC066201118640
Unit of MeasureEACH
Weight0.2 Pound (lb.)
Length6.1 Inches (in)
Width4.2 Inches (in)
Height1.9 Inches (in)
Hazardous MaterialNo
EPA Cert RequiredNo
Country of OriginCAN
Voltage24 VAC
Power MethodHard Wired
Digital-ProgrammableNo
Temperature Range40°F to 100°F (4.4°C to 37.7°C)
ApplicationMultistage
GEM - Case Quantity

Documentation

Tell Us How We Can Improve Your Shopping Experience - click here!