Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.

Johnson Controls TE-6311P-1 - #, 8" Nickel Duct Temperature Sensor with Plastic Enclosure

Item: TE-6311P-1
MFR: TE-6311P-1
This product is no longer available for purchase.
Comparable Product:


TE-6300 Series Temperature Sensors. All TE-6300 series sensors are two-wire, passive, resistance output devices. The TE-6300 Temperature Sensor line provides economical solutions for a wide variety of temperature sensing needs, including wall-mount, outdoor-air, duct, strap-mount, well-insertion, duct-averaging, and Variable Air Volume (VAV) flange-mount duct-probe applications. The TE-6300 line offers both a metal and a plastic enclosure for the most popular models. Sensors are available in the following types:
  • 1k ohm thin-film nickel
  • 1k ohm nickel averaging
  • 1k ohm thin-film platinum
  • 100 ohm platinum equivalent averaging
  • 1k ohm platinum equivalent averaging
  • 2.2k (2,252) ohm thermistor
  • 10k ohm thermistor, Johnson Controls® Type II

TE-63xxP Models - The TE-63xxP (plastic enclosure) models:
  • Provide a thermoplastic conduit box with 1/2-14 NPT female thread for connecting to conduit.
  • Provide aluminum mounting plate and 1/2-14 NPT threaded hub mounting options for the duct and duct averaging models.
  • Use the 1/2-14 NPT female thread to mount the Outdoor Air models directly to ridged conduit.
  • Provide optional sensor holders (order separately) to mount duct models in thermal wells.
  • Offer an optional accessory metal cover kit (order separately) to replace the plastic cover to meet UL 1995 plenum use requirements.
  • Include a replaceable sensing probe on duct probe, outdoor air, and well insertion models.

  • Full line of versatile sensors - supports all your temperature sensing needs from a single supplier: wall mount, outdoor air, duct probe, duct averaging, strap-mount, well insertion, and flange mount duct probe.
  • Single assembly ordering - simplifies ordering; provides a complete assembly in one box.
  • Models featuring an integral NPT Adaptor - increase sensor connection strength, which eliminates the need for a special adaptor.
  • Models with a stainless steel sensor probe - protect the sensor while increasing corrosion resistance.
  • Metal enclosure (TE-63xxM Models only) - meets plenum requirements.
  • Models featuring a retainer for the sensor holder - allow you to lock the sensor holder into the conduit box.
  • Brushed stainless steel mounting plate - offers a durable, aesthetically-pleasing design.
  • Low profile flush mount design - provides a tamper-proof installation ideally suited for schools, sporting complexes, retailers, prisons, and more.


NameJohnson Controls TE-6311P-1 - #, 8" Nickel Duct Temperature Sensor with Plastic Enclosure
BrandJohnson Controls
Gemaire Item NumberTE-6311P-1
Manufacturer Product NumberTE-6311P-1
SKU - PIM Number1405423017500
ERP Number66975
Unit of MeasureEACH
Weight0.6 Pound (lb.)
Length9.3 Inches (in)
Width4.6 Inches (in)
Height3.3 Inches (in)
Hazardous MaterialNo
EPA Cert RequiredNo
Country of OriginMEX
ApplicationDuct Probe
Type1K Nickel
GEM - Case Quantity