Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.

Johnson Controls VG1845CN - #, Three-Way Ball Valve, 1"

Item: VG1845CN
This product is no longer available for purchase.
Comparable Product:


VG1000 Series Three-Way, Stainless Steel Trim, NPT End Connections Ball Valves with Spring-Return Electric Actuators without Switches. VG1000 Series Ball Valves are designed to regulate the flow of hot or chilled water and, for some models, low-pressure steam in response to the demand of a controller in HVAC systems. Available in sizes 1/2 through 2 in. (DN15 through DN50), this family of two and three-way forged brass valves is factory or field mounted to Johnson Controls® VA9104, M9106, M9109, and M9100 Series Non-Spring-Return and VA9203 and VA9208 Series Spring Return Electric Actuators for on/off, floating, or proportional control.

  • Forged Brass Body - provides 580 psig static pressure rating.
  • 300 Series Stainless Steel Ball and Stem Assembly - tolerates high-temperature water or 15 psi saturated steam with fluid temperatures of -22 to 284°F (-30 to 140°C) or where a higher degree of corrosion protection is desired.
  • 500:1 Range ability - provides accurate control under all load conditions.
  • Maintenance-Free Design - performs without failure in excess of 200,000 full stroke cycles in iron-oxide contaminated water.


NameJohnson Controls VG1845CN - #, Three-Way Ball Valve, 1"
BrandJohnson Controls
Gemaire Item NumberVG1845CN
Manufacturer Product NumberVG1845CN
SKU - PIM Number1405423019462
ERP Number324020
Unit of MeasureEACH
Weight2.8 Pound (lb.)
Length4.2 Inches (in)
Width3.6 Inches (in)
Height5.6 Inches (in)
Hazardous MaterialNo
EPA Cert RequiredNo
Country of OriginMEX
Connection TypeNPT
GEM - Case Quantity