Gray Flex's models #FC is a U.L.181 approved Class 1
Connector material. It is constructed of multiple laminations
of aluminum foil and polyester film, encapsulating a galvanized steel wire helix, which forms an air tight duct.
Gray's foil connector is ideal in duct runs in areas where insulated flexible duct is not required. It is a low cost connector alternative for supply, return and venting of air. It should only be used for venting of air within the limits of the performance data. Gray's foil connector is ideally suited for use as a dryer vent hose due to its fire resistant property. When used as a connector in HVAC systems, codes require that the length not exceed 14'. This product is not intended for outdoor use.
Manufactured in nominal sheet metal round duct sizes:
3",4",5",6",7",8",9",10",12",14",16",18',20" and in 25'
lengths. Packaging for 3" and 4" is 4 pcs. per box.
All other sizes are 2 pc. per box. Special lengths are available upon request.
|Name||Quality Flex 03-FC - Foil Connector, 03" X 25'|
|Gemaire Item Number||03FC-1|
|Manufacturer Product Number||03-FC|
|SKU - PIM Number||1365692186289|
|Unit of Measure||EACH|
|Weight||23.8 Pound (lb.)|
|Length||300.0 Inches (in)|
|Width||3.0 Inches (in)|
|Height||3.0 Inches (in)|
|EPA Cert Required||No|
|Country of Origin||USA|
|Vapor Transmission||Jacket only .1 (max .3) perms per ASTMC 96A|
|Composition||Aluminum & Steel|
|Core Material||Exclusive Patented inner core|
|Fire Rating||U.L.181 (Flame Spread less than 25, smoke less than 50)|
|Maximum Air Flow||5,500 FPM|
|Maximum Pressure||Rated pressure: 10_ positive, 3/4_ W.G. negative per UL-181. Pressure rating is based on UL test procedure run at 2.5 times rated pressure (25_ W.G.) in straight lengths at room temperature independent of other conditions per UL-181 procedure. To ensure a margin of safety, Gray Flex recommends pressure not greater than 3_ water gauge positive when operating conditions of maximum velocity and temperature above 160 degrees may exist simultaneously.|
|Maximum Temperature||-20°F to 250°F (-28.8°C to 121.1°C)|
|Operating Temperature||-20°F to 250°F (-28.8°C to 121.1°C)|
|Pressure Rating||10" positive, 3/4" W.G. negative per U.L. 181|
|Size||3" x 25'|
|Warranty Offered||Gray Flex warrants for a period of five years from the date of purchase that all flexible ducts will be free from defects in material and workmanship, only if the ducts are installed in accordance with GrayÕs installation instructions and under conditions|
|Compliance||Meets requirements of U.L.181, SBCC, NFPA 90A & 90B, HUD 515-2.1, BOCA, ACCA, ADC, ETL|
|GEM - Case Quantity|